Smart accessories LoRaDeye Smart EV Charger
Brand: Deye · Advice and service from one source by our Deye specialists. All Deye models at a glance
- 11 kW (three-phase) or 7 kW (single-phase) / 22 kW (three-phase)
- Modes: plug and play, scheduled charging, solar-only charging
- Communication LoRa, Wi-Fi and Bluetooth
- Protection rating IP66
- Leakage current protection DC 6 mA, surge protection type II
Prices and dealer terms on request.
Deye Smart EV Charger – SUN-EVSE11K01-EU-AC · SUN-EVSE22K01-EU-AC
The Smart EV Charger is connected directly to an AC port of the Deye hybrid inverter and controlled via LoRa – with the modes plug and play, scheduled charging or solar-only charging.
How the Deye LoRa system works
- LoRa radio: radio frequency 863–870 MHz (EU), range approx. 200 m with clear line of sight.
- Works offline: the Deye hybrid inverter acts as the local control centre – the devices carry out their commands even without an internet connection.
- More self-consumption: define important and lower-priority loads, control loads by time and battery state of charge and make the best possible use of solar power.
Note according to Deye: for display and control in the app, the inverter needs firmware with LoRa support.
More LoRa accessories
All LoRa accessories at a glance →
Advice from the Deye specialists
As Deye specialists, we advise you on which LoRa components suit your system and support you with pairing and setup. Prices and dealer terms are available on request.
| Model | SUN-EVSE11K01-EU-AC · SUN-EVSE22K01-EU-AC |
|---|---|
| Models | SUN-EVSE11K01-EU-AC (11 kW) · SUN-EVSE22K01-EU-AC (22 kW) |
| Input voltage | 11 kW: 230/400 V · 22 kW: 230 V (single-phase), 230/400 V (three-phase) |
| Connection type | 11 kW: 3L+N+PE · 22 kW: L+N+PE, 3L+N+PE |
| Input current | 11 kW: 16 A · 22 kW: 32 A |
| Input frequency / range | 50 Hz / 45 – 55 Hz, 60 Hz / 55 – 65 Hz |
| Max. output power | 11 kW · 7 kW (single-phase) / 22 kW (three-phase) |
| Start method | Plug & charge / charge after scanning / scheduled charging |
| Protection functions | Over-temperature, under-temperature, overvoltage, undervoltage, short circuit, overload, earth fault |
| Residual current detection | DC 6 mA |
| Surge protection | Type II |
| Operating temperature | −40 to +55 °C |
| Permissible ambient humidity | 5 – 95 %, non-condensing |
| Permissible altitude | ≤ 3,000 m |
| Noise level | < 25 dB |
| Protection class | IP66 |
| Dimensions (W × H × D) | 104 × 264 × 57.5 mm |
| Weight | 3.7 kg |
| Charging cable length | 4.2 m |
| MTBF | 100,000 h |
| Communication | LoRa / Wi-Fi / BLE |
| Standards (excerpt) | EN IEC 61851-1:2019, IEC 61851-1:2017, EN IEC 61851-21-2:2021 |
Downloads
Questions about this product?
We advise you on sizing, compatibility and availability – personally and with hands-on experience.